=====Fujinon Cabrio XK 20-120mm T3.5 ===== 
{{ :lens:xk-cabrio-20-120mm.png?direct&400|}}
==== Summary ====
XK6x20 is a zoom lens for cinema camera that offers high optical performance compatible with 4K cameras and covers a wide range of focal length from 20mm to 120mm. It also realizes T3.5 brightness in the entire zoom range. There is no T drop and it offers comfortable operation. Various scenes can be shot with this single lens. “XK6x20” is equipped with detachable drive unit for electric zooming and focusing which is popular function with existing products. It also features 0.8mm gear pitch for compatibility with standard accessories.
==== Tech Specs ====
| Manufacturer    |Fujinon|
| Series          |Cabrio|
| Model           |XK|
| Focal Length    |20-120mm|
| Max Aperture    |T3.5|
| Min Aperture    |T22|
| Format          |Super 35|
| Image Circle    |31.5mm|
| Minimum Focus   |44 in.|
| Focus Rotation  |200|
| Iris Blades     |9|
| Optical Design  |23/17|
| Squeeze         |none|
| Front Diameter  |114mm|
| Filter Thread   |111mm|
| Focus/Zoom Rod  |-|
| Native Mount    |PL|
| Data Protocol   |LDS, Cooke /i|
| Length          |9.4 in.|
| Weight          |2858 g|
| Body Telescope  |none|
| Body Material   |Aluminum|
| Focus Drive     |Servo|
| Iris Drive      |Servo|
| Zoom Drive      |Servo|
==== History ====
Country of Origin: Japan \\
Release Date: - \\
Launch Price: - \\
Design Revisions:\\

==== Service ====
<nodisp 8>
Service Manual: [[staff:servicedb:fujinon20120|Disassembly/Re-assembly]] \\
Screws: [[staff:servicedb:fujinonparts|]]\\

\\
Full CLA: **18-20 hrs.**\\
<wrap note>Type I (old): Fujinon above 19-90, servo says SAF, S/N on FER\\
Type II (new): 19-90 above Fujinon, servo says SAFB, S/N on iris ring</wrap>\\
iris only: **3 hrs.**\\					
slip focus scale: **1 hr.**\\
<wrap note>remove beauty ring, FER (lifts off towards front), and nitotape holding scale to focus cam (mark before removing focus scale completely)</wrap>\\
C/A front optics only: **4 hrs.**\\
Adjust zoom curve:\\
<wrap note>0.003" is about 75 microns, I think the mid range spec for the 1st gen 19-90 was about 30 microns. I would try overhauling the zoom cam first (cleaning/changing grease and rollers) and try to bring down this error. If unsuccessful there are spacer washers under the first zoom cell that can be changed. On our collimator if the error is positive we add spacer thickness, if negative we subtract.</wrap>			
Re-installing and initializing servo:\\
<wrap note>https://www.youtube.com/watch?v=weizqXDKuP0</wrap>		\\	
back focus ring adjustment: **1-3 hrs.**\\					
</nodisp>

==== Notes ====
==== Media ====