=====Angénieux Type EZ-2 15-40mm T2===== 
{{ :lens:ez2-15-40mm.jpg?direct&400|}}
==== Summary ====
The Super 35 15-40mm T2 becomes a Full Frame 22-60mm T3 by swapping the rear optical block and iris scale and putting the convertible zoom scale in the appropriate position.

The Angénieux Type EZ-2 for FF/VistaVision and S35 format is a wide zoom lens with a zoom factor of 2.7x. Its focal range and aperture are set to 22-60mm F2.8/T3 for the FF/VV covering an image up to 46 mm and 15-40mm F1.9/T2 for the S35 covering an image up to 30mm. By exchanging the rear lens group, the lens can be switched from FF/VV to S35 and from S35  to FF/VV.
==== Tech Specs ====
| Manufacturer    |Angénieux|
| Series          |Type|
| Model           |EZ-2|
| Focal Length    |15-40mm|
| Zoom Ratio      |2.7x|
| Max Aperture    |T2|
| Min Aperture    |T32|
| Format          |Super 35|
| Image Circle    |30mm|
| Minimum Focus   |2 ft.|
| Focus Rotation  |-|
| Iris Blades     |9|
| Optical Design  |-|
| Squeeze         |none|
| Front Diameter  |114mm|
| Filter Thread   |110mm|
| Native Mount    |PL/EF/E|
| Data Protocol   |none|
| Length          |8.9 in.|
| Weight          |2132 g|
| Body Telescope  |none|
| Body Material   |Aluminum|
| Focus Drive     |Manual|
| Iris Drive      |Manual|
| Zoom Drive      |Manual|
==== History ====
Country of Origin: Japan\\
Release Date: 2017\\
Launch Price: $10,185 (S35 only) \\
Design Revisions:\\

==== Service ====
<nodisp 8>
Service Manual: [[staff:servicedb:angEZ|Disassembly/Re-assembly]] \\
Screws: [[staff:servicedb:angenieuxparts|]]\\
Instructional video: https://www.youtube.com/watch?v=xIf0Wf9-VRo \\
\\
Full CLA: **12-15 hrs.**\\
<wrap note>early version had bad batch in production. zoom cam has flaws in manufacturing process that make image shift constantly throughout zoom.\\
The EZ lenses are notoriously hard to get/keep optically clean due to the several follower channels (ie, contamination entry points). It's highly recommended, when re-assembling, to use the according tap (M1.7 for follower screws) to clean out the dry and flaky white glue that Angénieux uses.</wrap>\\
Re-collimate: **1-3 hrs.**\\
Re-align optics: **1-3 hrs.**\\
<wrap note>for the long end, remove FER and focus scale. several sets of screws located underneath. long ones and short ones. one set adjusts centering one adjust field, other length set helps hold optics in place. some trial and error is needed since all screws affect image simultaneously. \\
centering wide end, set screws found in pass through holes in PL mount. \\
**CAUTION!!!! set screws push on doublet # 17/18 which is not protected in a housing. can chip and break doublet!!!!!!**	</wrap>\\
Image shift in zoom: **14-15 hrs.**\\
<wrap note>Zoom section has MANY followers that are color coded for the different ODs. if image shift is present, swapping and changing followers will be necessary. This is time consuming. </wrap>\\
Hazy element in rear optical block: **2 hrs.**\\
<wrap note>if haze is located in front most section of optical block, it may clean off. quote investigation first! </wrap>\\
Z+I only: **12-15** (Full CLA required to access zoom) \\
<wrap note>To fully access Z+I, the focus assembly/helical/optics needs to be removed first; Z+I cannot be accessed from the rear. Additionally, the white powdery glue they use on their follower screws almost always flakes off into the optics, necessitating the need to remove and clean the zoom optics, thus now practically becoming a full CLA.</wrap>\\
Convert IRO: **1 hr.**\\
<wrap note>See Service Manual above!</wrap>\\
Internal Iris mech.: **12-15 hrs.**\\
<wrap note>to access internal iris mechanic/ring, entire lens must come apart. focus and zoom cams but be removed to access and remove internal iris control ring. many, MANY cam followers in focus, zoom and iris. proceed with caution!</wrap>\\
\\
**Screws:**\\
<wrap note>optical block: SCHS M2x6mm # ANG-920206009\\
red compendium ring (QTY: 3): M1.7x3 pan head jcis type 3 (black) # ANG-912173009\\
iris scale (QTY: 6): M1.7x3 pan head jcis type 3 (black) # ANG-912173009 \\
zoom scale (QTY:3): M1.7x3 pan head jcis type 3 (black) # ANG-912173009</wrap>\\
\\
**Accessories:**\\
<wrap note>Zoom stick: 4mm thread X 4mm deep\\
Lens support ring (above focus scale) and Zoom witness/SN ring: M3x4.5 deep</wrap>\\
</nodisp>

==== Notes ====

==== Media ====
{{ :lens:brochure-ez-ez3-1.pdf |}}\\
{{ :lens:user_manual_ez1_ez2_ez3_66073806aa.pdf |}}\\
{{ :lens:0320802-605_-b.pdf |}}\\